Advantages of disc brakes:
1. Disc brakes have better heat dissipation than drum brakes, and they are less likely to cause brake degradation and brake failure when the brakes are continuously stepped on;
2. The thermal expansion of the brake disc in the thickness direction is extremely small, and the change in size after heating does not increase the stroke of the brake pedal;
3. The disc brake system responds quickly and can do high-frequency braking actions, so it is more in line with the needs of the ABS system;
4. Disc brakes don't have the friction boosting effect of drum brakes, so the braking force of the left and right wheels is relatively even;
5. Due to the better drainage of the brake disc, it can reduce the situation of poor braking due to water or sediment;
6. Compared with drum brakes, disc brakes are simple in structure, easier to realize automatic gap adjustment, and easy to maintain.
7. When the output braking torque is the same, its size and mass are smaller than that of drum brakes.
Disadvantages of disc brakes:
1. Because there is no automatic braking effect of the drum brake, the braking force of the disc brake is lower than that of the drum brake;
2. The friction area between the brake pads of the disc brake and the brake disc is smaller than that of the drum brake, so that the braking force is also relatively small;
3. In order to improve the shortcomings of the above disc brakes, a greater pedaling force or oil pressure is required. Therefore, a brake disc with a larger diameter must be used, or the oil pressure of the brake system must be increased to increase the braking force;
4. The hand brake device is not easy to install. For some models with disc brakes on the rear wheels, a set of drum brake hand brake mechanism is added.
5. The abrasion of the lamella is relatively large, so the replacement frequency may be relatively high.
6. The maintenance cost is relatively high.






