There are several types of trailer axles, how can they be distinguished?

Sep 01, 2021 Leave a message

    Trailer bridges are also called axles in a broad sense. There are integral and disconnected types.

    The axle can be integral, like a huge barbell, with the body supported by the suspension system at both ends, so the integral axle is usually matched with a non-independent suspension;

    The axle can also be disconnected, like two umbrellas inserted on both sides of the body, and then each supports the body through the suspension system, so the disconnected axle is used with an independent suspension.

     According to the different driving modes, the axles are also divided into four types: steering axle, drive axle, steering drive axle and support axle.

     Among them, the steering axle and the support axle belong to the driven axle. Most cars use front-rear drive (FR), so the front axle is used as the steering axle and the rear axle is used as the drive axle; while the front-end front drive (FF) car uses the front axle as the steering drive axle, and the rear axle acts as a support axle.

     In general, the front axle of a car is mostly a steering axle, while the rear axle or the middle and rear axles are mostly drive axles; the front axle of off-road vehicles or most cars is both a steering axle and a drive axle, so it is called a steering drive axle; some single-axle drives The middle axle (or rear axle) of the three-axle car (6×2) is a drive axle, and the rear axle (or middle axle) is a supporting axle