Are the axles and the axle the same part?

Oct 17, 2023 Leave a message

Are the axles and the axle the same part?

 

In daily life, we often see the term "axle" and "axle" in some news or advertisements, and sometimes we will listen to some owners mention it. We know that these components are the necessities of the vehicle, it seems to be installed on the chassis of the vehicle, the role seems to be very different, but it is not clear if you go into detail.

 

In fact, the "axle" and "axle" look only one word difference, sound like the same item, and even some encyclopedia platforms will confuse it. But in fact, the two are not the same thing. Next, we will tell you a brief popularization.

 

Generally speaking, the components of commercial vehicles can be divided into four categories, namely: engine, electrical equipment, body and chassis. The most complex is the chassis, which is divided into four systems: transmission, driving, steering and braking.

 

Among them, the driveline is a power transmission system, that is, the power of the engine is transmitted to the wheels to drive the vehicle; The driving system is a weight-bearing system that enables the vehicle to carry heavy loads. The steering system and the brake system are the systems that control the vehicle, and the driver can operate the vehicle through these two systems. What we call "axle", "axle", "suspension" and "frame" basically belong to the driving system.

 

The axle, in general, refers to the half-shaft, which is an shaft between the main reducer and the driving wheel, mainly used for force transmission, and is the main part of the axle.

 

The main function of the axle is to carry the load, and it is connected with the frame through the suspension, and the wheels can be installed at both ends, which can also be understood as the axle assembly, that is, the axle, the brake and the suspension.

 

After the vehicle is loaded with goods, the direct force component is the frame, commonly known as the "girder", the frame through the suspension, the pressure is transmitted to the axle, and finally dispersed to the wheels.