Function Of Air Suspension System

Aug 23, 2021 Leave a message

   Generally speaking, models equipped with air-type adjustable suspension are equipped with ground distance sensors near the front and rear wheels. According to the output signal of the ground distance sensor, the trip computer will determine the height change of the vehicle and then control the air compression. The engine and exhaust valve make the spring automatically compress or extend, thereby reducing or increasing the ground clearance of the chassis to increase the stability of the high-speed vehicle body or the passability of complex road conditions. In daily adjustments, the air suspension will have several states. 1. Maintain state. When the vehicle is lifted by the lifter and leaves the ground, the air suspension system will close the relevant solenoid valve, and the computer will memorize the height of the vehicle to keep the vehicle at the original height after landing: 2. Normal state, that is, the engine is running. During driving, if the vehicle height changes beyond a certain range, the air suspension system will adjust the vehicle height at regular intervals: 3. Wake up state. When the air suspension system is awakened by the remote control key, door switch or luggage compartment lid switch, the system will check the vehicle height through the vehicle level sensor. If the height of the vehicle is lower than the normal height to a certain extent, the air tank will provide pressure to raise the vehicle to the normal height. At the same time, the air suspension can adjust the hardness of the shock absorber, including three states of soft, normal and hard (also marked as comfortable, normal, and sports three modes, etc.), and the driver can use the control buttons in the car. control.

   Of course, compared with traditional suspension, due to the more complicated structure of air-type adjustable suspension, the probability and frequency of failure will be higher than that of coil spring suspension system. Air is used as the power source for adjusting the height of the chassis. Tightness is also a problem. In addition, if the height of the chassis is frequently adjusted, it may cause local overheating of the air pump system, which will greatly shorten the service life of the air pump. Of course, with the continuous improvement of the technical level, many problems have been solved well, and at the same time, the application of car models has become more and more extensive.